您的位置: 标准下载 » 美军标 MIL » MIL-SPECS »

MIL-DTL-23659D

作者:标准资料网 时间:2024-05-09 10:22:31  浏览:8555   来源:标准资料网
下载地址: 点击此处下载
MIL-DTL-23659D, DETAIL SPECIFICATION: INITIATORS, ELECTRIC, GENERAL DESIGN SPECIFICATION FOR (03 MAR 2003) [SUPERSEDING MIL-I-23659B]., This specification furnishes general requirements for design and establishes uniform methods for testing electric initiators and electric initiator subassemblies. The purpose of the testing program is to determine the electric characteristics, soundness of mechanical design, output, and resistance to deleterious service environments. For purposes of this specification the term electric initiator includes items classified in FSC 1377 such as hot wire initiators, exploding bridgewire initiators, exploding foil initiators, conductive mix initiators, etc. Electric primers are not covered in this specification. All requirements for exploding foil initiators used in safety sensitive non-interrupted explosive train applications are contained in appendix A. Requirements for all other items are in the main body of this document. The term electric initiator does not include complete assemblies which have electric initiators as subassemblies, but include only the subassemblies themselves. In addition, electric initiators must be safe for handling, transportation, storage and use and must not deteriorate to a degree, which would render their performance or safety doubtful under normal service handling, adverse storage and transportation. RF susceptibility requirements and tests have not been included in this specification. Implicit in the one watt andone ampere maximum no-fire requirements of this specification is the recognition of the hazardsof electromagnetic radiation to ordnance (HERO). This one watt and one ampere requirement inconjunction with other design requirements stated herein does not solve the HERO problem;however they do serve as a means of reducing hazards from all spurious electric sourcesincluding electromagnetic radiation. General requirements for weapon systems to precludeHERO are established in MIL-STD-464.
下载地址: 点击此处下载
【英文标准名称】:Rotatingelectricalmachines-Part8:Terminalmarkingsanddirectionofrotation(IEC60034-8:2002);GermanversionEN60034-8:2002
【原文标准名称】:旋转电机.第8部分:旋转电机的接线端标志和旋转方向
【标准号】:DINEN60034-8-2003
【标准状态】:作废
【国别】:德国
【发布日期】:2003-09
【实施或试行日期】:2003-09-01
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:终端标志;直流电机;生成程序;作标记;发电机;旋转方向;接线端;交流电机;识别标志;旋转电机;名称与符号;转动;连接;电动机;电机;旋转感觉;旋转;标记;电气工程;定义;线路图
【英文主题词】:Alternating-currentmachines;Circuitdiagrams;Connections;Definition;Definitions;Designations;Direct-currentmachines;Distinguishingsigns;Electricmachines;Electricmotors;Electricterminals;Electricalengineering;Generatingprograms;Generators;Marking;Marks;Rotating;Rotatingelectricmachines;Rotationaldirections;Rotationalmotion;Senseofrotation;Terminalmarkings
【摘要】:
【中国标准分类号】:K20
【国际标准分类号】:29_160_01
【页数】:31P.;A4
【正文语种】:德语


基本信息
标准名称:起重机械 分级 第1部分:总则
英文名称:Cranes—Classification—Part1: General
中标分类: 机械 >> 通用机械与设备 >> 起重机械
ICS分类: 材料储运设备 >> 起重设备 >> 起重机
发布部门:国家质量监督检验检疫总局、国家标准化管理委员会
发布日期:2007-03-21
实施日期:2007-08-01
首发日期:2007-03-21
作废日期:
主管部门:中国机械工业联合会
提出单位:中国机械工业联合会
归口单位:全国起重机械标准化技术委员会(SAC/TC 227)
起草单位:北京起重运输机械研究所、大连重工起重集团有限公司
起草人:何铀
出版社:中国标准出版社
出版日期:2007-07-01
页数:7页
计划单号:20031093-T-604
书号:155066·1-29607
适用范围

本部分根据起重机在设计预期寿命期间应完成的工作循环数和代表名义栽花状态的载荷谱系数规定了起重机的通用分级方法。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 通用机械与设备 起重机械 材料储运设备 起重设备 起重机